Pixus Technologies

PS1222 3U cPCI
Power backplanes provide a flexible interface for the power supply requirement.  As a result, there is no need to modify expensive backplanes to incorporate redundant power supplies or N+1 configuration.  Pixus Technologies offers power backplanes that accommodate 1, 2, 3, 4, 7, and even 10 power supplies.  Multiple power supply backplanes may be bridged together for additional power supply requirements.

PS1250A 6U 8HP Power Backplane
The PS1250 is a 6.5U (or 6U) tall, 8HP wide power backplane. The PS1250 is a backwards compatible version of the PS1250 with two additional power bugs. The PS1255 has 1 less +5 volt power bug than the PS1250A. The PS1250 may be used with the PS1300 or PS1400 series of modular CompactPCI backplanes, or in any other application where large supply currents are required.The PS1250A will accept 1 Positronic type 500W power supply. Either AC or DC power is supplied to the power plane by means of a three contact Mate-n-Lok connector.

PS1257
This board is also designed to accommodate rear power entry modules for 48V applications. Either AC or DC power is supplied to the powerplane by means of a six contact Mate-n-Lok connector. There are 2 ATX-style power connectors on this power plane, for distribution of regulated power to the modular CompactPCI backplanes. The connectors used are Molex “Mini-Fit Jr.” series headers or compatible connectors.

PS1258
The PS1258 is a 6.5U (or 6U) tall, 8HP wide backplane designed to accept a single 6U x 8HP CompactPCI hotinsertable power supply modules, and supply DC power to other CompactPCI backplanes. This board is also designed to accommodate rear power entry modules for 48V applications.

PS1240 and PS1241 6U x 16HP
The PS1240 is a 6.5U (or 6U) tall, 16HP wide power backplane, intended for use with the PS1300 or PS1400 series of modular CompactPCI backplanes, or in any other application where large supply currents are required. The PS1240 will accept up to two Positronic type 500W power supplies operating in current sharing mode. Any power supply that is compatible with the backplane dimensions and pinout shown below may be used. Either AC or DC power is supplied to the powerplane by means of a six contact Mate-n-Lok connector.

PS1245 6U x 16HP (Offset Connector)
The PS1245 uses the same printed circuit board as the PS1240/1, only with its power supply connectors offset to the left to accommodate PICMG 2.11 compliant power supplies.

PS1247 6U x 16HP
The PS1247 is a 6.5U (or 6U) tall, 16HP wide backplane designed to accept up to four 3U x 8HP (stacked 2 x 2) CompactPCI hot-insertable power supply modules, and supply DC power to other CompactPCI backplanes. This board is also designed to accommodate rear power entry modules for 48V applications.  Either AC or DC power is supplied to the powerplane by means of a six contact Mate-n-Lok connector.

PS1248 6U x 16HP
The PS1248 is a 6.5U (or 6U) tall, 16HP wide backplane designed to accept up to two 6U x 8HP (2 x 1) CompactPCI hot-insertable power supply modules, and supply DC power to other CompactPCI backplanes. This board is also designed to accommodate rear power entry modules for 48V applications.

PS1260 6U x 24HP
The PS1260 is 6.5U (or 6U) tall, 24HP wide power backplanes. It may be used with the PS1300, PS1400, or PS4400 series of modular CompactPCI backplanes, or in any other application where large supply currents are required. The PS1260 will accept up to three Positronic type 500W power supplies operating in current sharing mode. The PS1260 supports different power supply styles. The PS1260 supports the standard Positronic style used by most cPCI power supply vendors, including the PS335x and PS535x series of power supplies. 

P47 Connector
Pixus Technologies uses P47 power supply connectors, as specified in the PICMG 2.11 R1.0 Power Interface specification.